Road Mode
1. Truesight always powers up in road mode.
2. Truesight must be in road mode outside of field.
3. Before engaging Truesight, disable road mode.
4: Before leaving field, enable road mode.
Engaging Truesight 2
1. Press the Engage button.
2. Press Foot Switch.
•
See Settings>>Auxiliary Engage section of this manual
3. Auto engage.
•
See Settings>>Auto Engage section of this manual
Disengaging Truesight 2
1. Manually turn steering wheel.
2. Press the Engage button.
3. If foot switch is installed and enabled, press foot pedal.
4. If Auto Engage is enabled, raise head above auto engage height that was set during the calibration.
Bump Steer
•
Press the Right button to shift machine to right until centered on row
•
Press the Left button to shift machine to left until centered on row
35
Overview
To Next Page
Loading...