059305–00 REV. E
HEAT-TIMER CORP.
|
43
INITIAL PROGRAMMING OF THE
ETV PLATINUM PLUS
SYSTEM STARTUP MENU
When the ETV Platinum Plus is first powered-on and initialization
is complete, the System Startup menu screens appear. Follow the
System Startup menu screens to program the unit. Ensure the ETV
module is in the PROGRAM mode—see item 9 in Figure 1 on page 4.
06 DISPLAY AND PROGRAMMING
NOTE
If the System Startup menu screens to not
appear, the ETV Platinum Plus has already been
configured. To check the configuration or to
make changes, select Sy s t em St a r t u p from
the Main menu.
To Next Page
Loading...
