059305–00 REV. E
HEAT-TIMER CORP.
|
51
SCHEDULES MENU
The Schedules menu is used to configure schedules that are used to set an absolute temperature. Up to four periods can be
configured per day. Each period can have its own start time and temperature setting, and will maintain that temperature setting until
the next scheduled period start time.
06 DISPLAY AND PROGRAMMING
NOTE
Available only when Control Mode is set to ETV or ETV + HTLV (See “Control Mode” on page 44). If a schedule is set, the
schedule overrides the Setpoint setting (See “Setpoint” on page 49).
To Next Page
Loading...
