HEIDENHAIN iTNC 530 HSCI - Analog Outputs; Assignment of the Inputs and Outputs

11 – 146 HEIDENHAIN Service Manual iTNC 530 HSCI
11.7.5 Analog outputs
Number of analog inputs:
Voltage range: –10 V to +10 V
Load impedance: > 5 kΩ
Output current: < 2 μΑ
Resolution: 10 mV
11.7.6 Assignment of the inputs and outputs
The inputs and outputs are assigned to symbolic operands using the PC software IOconfig.
The absolute address of the input or output, the pertaining device, the slot and the terminal name
can be seen from the Bus Diagnosis. --> See ”Identification of the PLC operands” on page 12 – 149.
Device Analog outputs (±10 V)
PLA-H 08-04-04 4