February 2012 13 – 175
13.7 File management in the TNC partition
Calling the
TNC partition
8 Select the Programming and Editing operating mode.
8 Call the Program Management.
Figure: Program management of iTNC 530 HSCI
The directory structure is displayed on the left side, the associated files are listed on the right.
With the +/- key or with ENTER you can open and close subdirectories.
Select subdirectories or files by pressing the UP and DOWN arrow keys.
The selected path and file name are displayed in the header.
Use the LEFT and RIGHT arrow keys to toggle between directory field and files field.
Using the mouse With the setting Enhanced 2 for the program manager, you can also use the mouse for navigation (see
"Settings in the program manager" on page 174).
To Next Page
Loading...
