21 – 332 HEIDENHAIN Service Manual iTNC 530 HSCI
21.1.3 Tables for power supply modules, power stages and motors
Via the name of the power supply module (MP2198.x), of the power stage used (MP2100.x) and
of the motor (MP2200.x), the control can access the values in the respective power supply module,
power stage and motor tables.
How to access the tables:
Table of power
supply modules
8 Open the machine parameter list.
8 Place the cursor on the power supply module concerned (MP2198.x).
8 Switch to the next soft-key row.
8 Press this soft key. --> The table with the power supply modules appears:
The original table (SUPPLY.SPY) contains supply modules of various OEMs as well as
HEIDENHAIN supply modules, HEIDENHAIN compact inverters and HEIDENHAIN controller
units with integrated UEC1xx inverter.
The original HEIDENHAIN table of the power supply modules is stored in the SYS partition of
the data medium.
The OEM can create his own table of power supply modules (with additional power supply
modules and/or edited data) which is stored in the PLC partition of the data medium.
If the supply module tables have the same name (SUPPLY.SPY), the data of the OEM table in
the PLC partition have priority.
Do not change any values in the supply module table! This could lead to damage to property
or persons!
To Next Page
Loading...
