13 – 176 HEIDENHAIN Service Manual iTNC 530 HSCI
Overview of the
most important
TNC file types
Which file type is
to be listed?
File information
File type File extension
NC program, HEIDENHAIN plain language .H
Tool table .T
NC program, DIN/ISO .I
Pallet table .P
Datum table .D
ASCII file (text file) .A
Point table .PNT
Pocket table (tool changer) .TCH
Preset table .PR
Cutting-data table .CDT
Freely definable tables (e.g., tables of tool material and workpiece material) .TAB
Dependent data (such as structure items) .DEP
If you cannot find certain files although the cursor is placed in the correct directory, a file types
filter may be active.
The filter setting is displayed above the file list, for example TNC:\*.H.
To remove this filter use the soft keys SELECT TYPE --> SHOW ALL.
Use this key to switch between soft-key rows.
File name Name consists of up to 25 characters plus file extension
Byte File size in bytes
Status File properties:
E The file is selected in Programming and Editing.
S The file is selected in Test Run (simulation).
M The file is selected in a Program Run mode of operation.
P Protected file that cannot be deleted or edited.
+ This file has dependent files (section file, tool usage file; see User's Manual).
Date Date on which file was last changed
Time Time at which the file was last changed
Refer to the iTNC 530 HSCI User’s Manual for detailed information about file
management.
To Next Page
Loading...
