13 – 178 HEIDENHAIN Service Manual iTNC 530 HSCI
Select subdirectories or files by pressing the UP and DOWN arrow keys.
The selected path and file name are displayed in the header.
Use the LEFT and RIGHT arrow keys to toggle between directory field and files field.
Using the mouse With the setting Enhanced 2 for the program manager, you can also use the mouse for navigation (see
"Settings in the program manager" on page 174).
Overview of the
most important
PLC file types
Which file type is
to be listed?
File type File extension
Compiled PLC programs .PLC
ASCII files (text files, e.g., PLC dialogs and error messages) .A
Help files .HLP
Important system file OEM.SYS
System files .SYS
Compensation value tables .COM
Compensation value assignments .CMA
Standard PLC error messages .PET
Source files .SRC
Soft-key project files .SPJ
Machine parameter lists .MP
OEM cycles .CYC .DES .PIC .ELE
Oscilloscope recordings .DTA
Network settings .N00 .M00 .P00
If you cannot find certain files although the cursor is placed in the correct directory, a file types
filter may be active.
The filter setting is displayed above the file list, for example PLC:\*.SRC.
To remove this filter use the soft keys SELECT TYPE --> SHOW ALL.
Use this key to switch between soft-key rows.
To Next Page
Loading...
