16 – 224 HEIDENHAIN Service Manual iTNC 530 HSCI
8 Run all firmware updates. --> See ”Detecting and loading firmware updates” on page 29 – 524.
8 Check the NC software version incl. associated service pack. --> Press the MOD key.
Functional test
8 Finally, check the machine functions!
The NC software with the new service pack detects that the firmware of an HSCI device needs to
be updated.
After you have transferred the service pack from your laptop to the control (e.g., on
PLC:\servicepack), you may delete it from the laptop in order to free memory space on the
hard disk. The service pack was automatically archived in the SYS partition of the hard disk and
can be called at any time.
To Next Page
Loading...
