HEIDENHAIN iTNC 530 HSCI - Page 333

21 – 334 HEIDENHAIN Service Manual iTNC 530 HSCI
Table of power
stages
8 Open the machine parameter list.
8 Place the cursor on the power stage concerned (MP2100.x).
8 Switch to the next soft-key row.
8 Press this soft key. --> The table with the power stages appears:
Note
The original table (INVERTER.INV) contains power stages of various OEMs as well as
HEIDENHAIN power modules and the output stages of HEIDENHAIN compact inverters
and HEIDENHAIN controller units with integrated UEC1xx inverter.
Note
The original HEIDENHAIN table of the power stages is stored in the SYS partition of the
data medium.
The OEM can create his own table of power stages (with additional power stages and/or
edited data) which is stored in the PLC partition of the data medium.
If the power stage tables have the same name (INVERTER.INV), the data of the OEM table in
the PLC partition have priority.
DANGER
Do not change any values in the power stage table! This could lead to damage to property
or persons.