HEIDENHAIN iTNC 530 HSCI - Page 436

February 2012 27 – 437
Storage medium
Main computer MC 6241 (MC = main computer)
Main computer for installation in an
electrical cabinet:
 Processor:
Pentium M with 1.8 GHz
 1 GB RAM
 Main computer unit for single-processor
version
 HSCI interface
 2 x Ethernet interface 100BaseT
 2 x USB 2.0
 1 x RS-232C
 Optionally with Profibus
SSDR hard disk (SSDR = solid state disk removable)
Additionally required for MC 6222:
 SSDR hard disk of the iTNC 530 HSCI
• Contains the NC software
• Memory capacity 32 GB, of which
21.4 GB are for the TNC:\ partition
and 1 GB for the PLC:\ partition;
remaining memory for system data
HDR hard disk (HDR = hard disk removable)
Additionally required for MC 6241:
 HDRhard disk of the iTNC 530 HSCI
• Contains the NC software
• Memory capacity 160 GB, of which
138 GB are for the TNC:\ partition
and 1 GB for the PLC:\ partition.
Remaining memory for system data