HEIDENHAIN iTNC 530 HSCI - Page 467

28 – 468 HEIDENHAIN Service Manual iTNC 530 HSCI
Pin layout (for the LC or RCN):
CC 61xx Adapter cable 509 667-xx Adapter cable 369 124-xx
Adapter cable 369 129-xx
or RCN
Male Assignment Female Color Female Male Color
1+5 V (U
P
) 1 Brown/Green 7 7 Brown/Green
2 0 V (U
N
) 2 White/Green 10 10 White/Green
3 A+ 3 Green/Black 15 15 Green/Black
4 A– 4 Yellow/Black 16 16 Yellow/Black
50 V
6 B+ 6 Blue/Black 12 12 Blue/Black
7 B– 7 Red/Black 13 13 Red/Black
8 0 V 8 Internal shield 11 11 Internal shield
9 Do not assign
10 Clock 10 Green 8 8 Violet
11 Do not assign
12 Clock
12 Brown 9 9 Yellow
13 Temperature+ 13 Yellow 5
14 +5 V (sensor) 14 Blue 1 1 Blue
15 Data 15 Red 14 14 Gray
16 0 V (sensor) 16 White 4 4 White
17 Do not assign
18 Do not assign
19 Do not assign
20 Do not assign
21 Do not assign
22 Do not assign
23 Data
23 Black 17 17 Pink
24 0 V
25 Temperature – 25 Violet 6
Hsg. Housing Hsg. External shield Hsg. Hsg. External shield
Note
The interface complies with the requirements of EN 61800-5-1 for "protective extra-low voltage"
(PELV).