HEIDENHAIN iTNC 530 HSCI - Page 575

31 – 576 HEIDENHAIN Service Manual iTNC 530 HSCI
Deleting entries
and markings
If you want to delete from right to left :
8 Press this key.
If you want to delete from left to right:
8 Press the CE key.
If you have deleted an entire line:
8 Press the END key. --> The machine parameter editor generates the deleted parameter again and
asks you for information.
8 Enter the correct value (if required, look it up in the original MP list).
Attention
Do not press the DEL key if you want to delete individual letters, words, numbers, etc.
DEL will delete the entire line.