HEIDENHAIN TNC 370 - Page 51

1 Introduction
1.4 Graphics and Status Display
General program information
4
d
TEST RUN
Active program / Current block number
XTL. x
-51,666 T12 2
:
+11,325 I
+138.086
C +18O,O'dO
Positions and coordinates
KTL. )(
-51,868
T12 2
r
+11,325 q
mm
+138,000
M5/9
C +180,000
Active program / Current block
number
Additional position display
Display of active basic rotation
XTL. x
-4,905
r
+39,175
+138,060
C
+180,000
Active tool
Active tool length and active tool radius
Oversizes (delta values) programmed with
TOOL CALL (PGM) and defined in the tool
table (TAB)
Tool life, maximum tool life and maximum
tool life for TOOL CALL
Display of the active tool and the (next)
replacement tool
J
4
I-32
TNC 370 -