HEIDENHAIN TNC 370 - 3.1 Test Run

3 Test Run and Program Run
4
3.1 Test Run
In the TEST RUN mode of operation the TNC checks program and
program sections for the following errors without moving the machine
axes:
l Geometrical incompatibility
l Missing data
l Impossible jumps
To do a test run
,
) ISTRRT\
Test the entire program.
Test the program up to a certain block number.
Test run features
Punction
Test run in Full Sequence/Single Block
Soft kq
Test run with/without graphics
Start test run from program beginning
Start test run from current block
Test run up to block N
32 TNC 370