4 Programming
4.2 Tools
T
NAME
Number by which the tool is called in the program
Name by which the tool is called in the program
(up to 16 characters)
d
TOOL NAME ?
L
Compensation value for tool length
TOOL LENGTH L ?
d
R
DL
Tool radius R
Delta value for tool length
TOOL RADIUS R ?
TOOL LENGTH OVERSIZE ?
DR
TL
Delta value for tool radius R
Tool lock
TOOL RADIUS OVERSIZE ?
TOOL LOCKED ?
RT
TIME1
Number of a Replacement Tool, if available (see also TIME21 REPLACEMENT TOOL ?
Maximum tool life in minutes:
The meaning of this information can vary depending on
the individual machine tool. Your machine manual
provides more information on TIMEI.
MAXIMUM TOOL LIFE ?
TIME2 Maximum tool life in minutes during TOOL CALL:
If the current tool life reaches or exceeds this value,
the TNC changes to the replacement tool during
the next TOOL CALL (see also CUR.TIME) MAX. TOOL LIFE FOR TOOL CALL ? -
CUR.TIME Time in minutes that the tool has been in use:
The TNC automatically counts the current tool life. A
starting value can be entered for used tools. CURRENT TOOL AGE ?
DOC
PLC
Comment on the tool (up to 16 characters)
This function is not available vet.
TOOL DESCRIPTION ?
PLC STATUS
--
Overview: Information in tool tables
4-10
TNC 370 -
To Next Page
Loading...
