HeroSpeed NVR - 2.3 Mouse NOTEs; 2.4 Input Method Introduction

13
Operate NVR through mouse left button, right button & scroll wheel．
Mouse actions
Function
Click left mouse
button
1. Select one of the options
2. Insertion cursor, enter or modify the value of a
parameter
3.During playback, click the timeline to switch the
playback progress.
Click right
mouse button
1. When interface not locking, click right mouse
button, system menu pops up
2. When interface locking, click right button on
real-time preview interface, login interface pop up
3.Click the right mouse button on the submenu, return
to the previous menu
Double-click
the mouse left
button
In the preview and playback state, switch between
single screen and multi screen.
Mouse drag
1. In the pan/tilt control state, the direction is rotated.
2. In the video occlusion alarm and motion detection
alarm area settings, set the area range.
3. Drag the area of the electronic zoom.
4. In the preview interface, select a channel and press
and drag to switch to other channel locations.
5. When playing back the video, drag the progress bar
to switch the video file to be played.
Slide mouse
scroll wheel
1.Time setting
2.Select the drop-down menu values
3.When previewing, you can switch the preview
channel.
4.When zooming in electronically, you can zoom in and
out of the video image.
2.4 Input Method Introduction
Input method includes lowercase and uppercase English letters. Clicking
" " button on the left can switch the input method and the symbol
" " represents deleting incorrect input, as shown in Figure 2-4 and Figure
2-5.