The channel is composed of Device and Encode Parameters, and can operate
Camera, POE, OSD, Image, PTZ, Privacy, Change Name and Main / Sub
Stream on NVR.
5.3.5.1 Camera
After adding a remote device, you can view the video screen of the remote
device directly on the NVR, and perform operations such as storage and
management. Different devices support different numbers of remote devices.
You can add required remote devices based on actual conditions.
Prerequisites:
Before adding the device, please confirm whether the IP camera has been
connected to the network where the NVR is located and set its network
parameters correctly.
NOTE!
The device may face network security problems when it is
connected to the Internet. Please strengthen the protection of personal
information and data. When you find that the device may have hidden
network security risks, please contact us in time. It is recommended
that you conduct a periodic network security assessment of the device.
Our company can provide corresponding professional technical services.
Please understand that you are responsible for properly
configuring all passwords and other related product security settings,
and keeping your username and password properly.
The specific operation steps are as follows:
Step 1: In the main menu, click " →Camera" to enter Camera interface,
as shown in Figure 5-29
○
1
below.
To Next Page
Loading...