High Voltage DTS-60A - Keyboard Operations

DTS-60A OPERATORS MANUAL
6
1.3.2 Keyboard Operations
Although most of the keyboard operations are based on similar
methods, there are some cases where an optional key functionality is
enabled. These exceptions are described analytically in the
respective manual paragraphs.
The most common keyboard operations are the following:
Menu and Submenu Operations
 MENU Enter to the Menu or Selected Submenu
 BACK Exit from Menu or Current Submenu
 UP Go to the previous selection
 DOWN Go to the next selection
 ENTER Enter to the selection
Simple Test Operations
 MENU Enter to the Menu or Selected Submenu
 BACK Enable/ Disable Stirrer
 UP Increase Voltage Rate of Rise
 DOWN Decrease Voltage Rate of Rise
 ENTER Execute Test
 ANY After Starting the Test ANY key interrupts the
process
Number Edit Operations
 MENU -
 BACK Discard changes and return
 UP Increase the current value
 DOWN Decrease the current value
 ENTER Enter the value
String Edit Operations
 MENU Select Capitals, Smalls, Numbers, Symbols
 BACK Delete Character
 UP Select previous character
 DOWN Select next character
 ENTER Enter the string
A detailed example follows, Figure 1.4, in order to clarify the
String Edit keyboard operation. The example refers to a string entry
for the Name of the Operator Setup menu (see paragraph 2.3.2).