High Voltage DTS-60A - Operator Setup

DTS-60A OPERATORS MANUAL
23
2.3.2 Operator Setup
The Operator set-up application is used for setting the equipment's
operator information. The latter are printed as a header information of
every test result receipt (see paragraph 8). The header information concerns
the operator of the equipment and contains the following items:
1. Company Title
2. Name
3. Contact Information
4. Other information
The Operator Set-up Application seems like a menu with the above
selections, Figure 2-6. The difference ??exists at a specific selection by
pressing the ‘ENTER’ key. This will prompt the user to enter a string (for
string edit see paragraph 1.3.2). Figure 2-6 illustrates the Operator setup
procedure.