DTS-60A OPERATORS MANUAL
8
1.3.3 Warning Messages
Display shows Warning Messages in the following cases.
1. Lid is Open, Figure 1.5.
This warning message is displayed when the Lid of the
equipment is open and a test procedure is enabled. The
current operation (i.e. test execution) will be restarted when
the lid will close.
Warning Message
PROGRAM : ASTM-D1816
12:10 01/08/05 65 °F
Lid is Open
DURATION: 00:00:00
SYSTEM HALTED...
Figure 1.5 – ‘Lid is open' Warning Message
If the Warning Message “Lid is Open” is
depicted when the Lid is closed, contact
the distributor or the manufacturer.
To Next Page
Loading...
