DTS-60A OPERATORS MANUAL
84
8.4 time Command
The time command is used for asking the current time, or settings a
new time to the system, Figure 8-5. If no argument is given, the system
returns the current time. Note that the time argument refers to hh = hours
(00 to 23), mm = minutes (00 to 59) and ss = seconds (00 to 59).
Syntax
:
time <argument (optional)>
Arguments : - (get current time)
hh:mm:ss (set new time)
Figure 8-5 – time Command
To Next Page
Loading...
