High Voltage DTS-60A - Indicators

DTS-60A OPERATORS MANUAL
13
1.3.6 Indicators
Display shows the following Indicators, in the following cases,
Figure 1.12.
1. Current Stage Indicator
This indicator notifies the user for the current stage of a
test procedure.
2. HighVoltage On/Off Indicator
This indicator notifies the user for the status of the high
voltage tank. If the indicator is displayed, the high voltage
is ON.
3. Stirrer Indicator
This indicator notifies the user for the status of the stirrer.
If the indicator is displayed the stirrer is ON.
4. Breakdown Blinking Indicator
During a test procedure, this blinking indicator notifies the
user for a breakdown detection.
PROGRAM:ASTM-D1816
STARTUP WAIT TIMER...
DURATION:
0.0
00:00:00
kV
STIR
STAGE
1
HV ON
12:10 01/08/05 65 °F
BreakDown Blinking Indicator
Stirrer on/off indicatorHigh Voltage On/Off Indicator
Current Stage Indicator
Figure 1.12 – Indicators