High Voltage DTS-60A - Date Command

DTS-60A OPERATORS MANUAL
85
8.5 date Command
The date command is used for asking the current data, or setting a
new date to to system, Figure 8-5. If no argument is given, the system
returns the current date. Note that the date argument refers to dd = days (0
to 31), mm = months (00 to 12) and yyyy = years (0000 to 9999).
Syntax : date <argument (optional)>
Arguments : - (get current date)
dd/mm/yyyy (set new date)
Figure 8-6 – date Command