HIKVISION DS-K1T341A Series

Note
If you select the enrollment staon, you should click Login, and se
t IP address, port No., user
name and password of the device.
5. Click Import t
o start imporng the person informaon to the client.
Note
Up to 2,000 persons and 5,000 cards can be imported.
The person informaon, including person details, person's ngerprint
informaon (if
congured), and the linked cards (if congured), will be imported to the selected organizaon.
9.4.20 Move Persons to Another Organizaon
You can move the added persons to another organizaon if you need.
Before You Start
• Make sure you have added at least two organizaons.
• Make sure you have imported person informaon.
Steps
1. Enter Person module.
2. Select an organizaon in the le panel.
The per
sons under the organizaon will be displayed in the right panel.
3. Select the person to move.
4. Click Change Organizaon.
5. Select the organizaon to move persons to.
6. Click OK.
9.4.21 Issue Cards to Persons in Batch
The client provides a convenient way to issue cards to mulple persons in a batch.
St
eps
1. Enter Person module.
2. Click Batch Issue Cards.
All the added persons with no card issued will be displayed in the right panel.
3. Oponal: En
ter key words (name or person ID) in the input box to lter the person(s) that need
issuing cards.
4. Oponal: Click Sengs to set the card issuing parameters. For details, refer to Issue a Card by
Local Mode .
5. Click Inialize to
inialize the card enrollment staon or card reader to make it ready for issuing
cards.
DS-K1T341A Series Face
Recognion Terminal User Manual
113