HIKVISION DS-K1T341A Series

9.11 Time and Aendance
The Time and Aendance module provides mulple funconalies to track and monitor when
employees start and stop work, and full control of employees working hours such as late arrivals,
early departures, me taken on breaks and absenteeism.
Note
In this secon, we introduce the conguraons before you can geng the
aendance reports. The
access records recorded aer these conguraons will be calculated in the stascs.
9.11.1
Congure Aendance Parameters
You can congure the aendance parameters, including the general rule, overme parameters,
aendance check point, holiday, leave type, etc.
Set Weekend
The days of weekends may vary in dierent countries and regions. The client provides weekends
denion funcon. You can select one or more days as the weekends according to actual
r
equirements, and set dierent aendance rules for weekends from workdays.
Steps
Note
The parameters congured here will be set as default for the newly added me period. It will not
aect the existed one(s).
1. En
ter Time & Aendance module.
2. Click Aendance
Sengs → General Rule .
3. Select the day(s) as weekend, such as Saturday and Sunday.
4. Click Save.
Congure Overme Parameters
You can congure
the overme parameters for workday and weekend, including overme level,
work hour rate, aendance status for overme, etc.
Steps
1. Click Time &
Aendance → Aendance Sengs → Overme .
2. Set required informaon.
Overme Level for Workday
DS-K1T341A Series Face Recognion Terminal User Manual
151