HIKVISION DS-K1T341A Series

Set the device installed oor No.
Door Staon No.
Set the device installed oor No.
Note
If you change the No., you should reboot the device.
Community No.
Se
t the device installed community No.
If set the device type as Outer Door Staon, you can set the period No., outer door staon No.,
and community No.
Period No.
Set the device installed period No.
Outer Door Staon No.
If you select outer door staon as the device type, you should enter a number between 1 and
99.
Note
If you change the No., you should reboot the device.
Community No.
Se
t the device installed community No.
8.5.19 Access Control Sengs
Set Authencaon Parameters
Click Conguraon → Access Con
trol → Authencaon Sengs .
Note
The
funcons vary according to dierent models. Refers to the actual device for details.
Click Sa
ve to save the sengs aer the conguraon.
Device Type
Select Main Card Reader or Sub Card Reader from the drop-down list.
Main Card Reader
You can congure
the device card reader's parameters.
Sub Card Reader
You can congure the connected peripheral card reader's parameters.
DS-K1T341A Series Face Recognion Terminal User Manual
77