HIKVISION DS-K1T341A Series User Manual

Remain All Unlocked
All doors in the group will be unlocked (no maer closed or open). All the persons can access
the doors with no credenals required.
Remain All Locked
All doors in the group will be closed and locked. No person can access the doors even if
he/she has the authorized credenals, except the super users.
Capture
Capture a picture manually.
Note
The Cap
ture buon is available when the device supports capture funcon. The picture is
saved in the PC running the client. For seng the saving path, refer to Set File Saving Path in
the user manual of the client soware.
Result
The ic
on of the doors will change in real-me according to the operaon if the operaon is
succeeded.
9.10 Event Center
The event informaon (for example, device oine) received by the client displays. In the Event
Center, you can check the detailed informaon of the real-me and historical events, view the
e
vent linked video, handle the events, and so on.
Before the client can receive the event informaon from the device, you need to enable the events
of the resource and arm the device rst. For details, refer to Enable Receiving Event from Devices .
9.10.1 Enable Receiving Event from Devices
Before the client
soware can receive event nocaons from the device, you need to arm the
device rst.
Steps
1. Click → Tool → De
vice Arming Control to open Device Arming Control page.
All the added devices appear on this page.
2. Oponal: If there are to many devices, enter the key words in Filter led to lter the device(s)
you want.
Note
For the ltered devices, you can click Arm All
or Disarm All to enable receiving event of these
devices.
DS-K1T341A Series Face Recognion Terminal User Manual
145

HIKVISION DS-K1T341A Series Specifications

General

Brand	HIKVISION
Model	DS-K1T341A Series
Category	Touch terminals
Language	English