HIKVISION DS-K1T341A Series

It contains more than one metables. The person can check in/out in any of the metables
and the aendance will be eecve.
If the mulple shi schedules contains three metables: 00:00 to 07:00, 08:00 to 15:00 and
16:00 to 23:00. The aendance of the person adopng this mulple
shi schedules will be
eecve in any of the three metables. If the person checks in at 07:50, it will apply the
near
est metable 08:00 to 15:00 to the person's aendance.
Rule
Set other rule for the schedule, such as Check-in Not Required, andCheck-out Not Required.
6. Click Save.
Check Shi Schedule
You can check the shi schedule in calendar or list mode. You ca also edit or delete the shi
schedule.
Steps
1. Click Time & Aendance → Shi Schedule to enter the Shi Schedule Management page.
2. Select the organizaon and corresponding person(s).
3. Click or to view the shi schedule in calendar or list mode.
Calendar
In calendar mode, you can view the shi schedule for each day in one month. You can click
the t
emporary schedule for one day to edit or delete it.
List
In list mode, you can view the shi schedule details about one person or organizaon, such
as shi name, type, eecve period and so on. Check the shi schedule(s), and click Dele
te
to delete the selected shi schedule(s).
9.11.5 Manually Correct Check-in/out Record
If the aendance status is not correct, you can manually correct the check-in or check out record.
Y
ou can also edit, delete, and export the check-in or check-out record.
Before You Start
• You should add organizaons and persons in Person module. For details, refer to P
erson
Management .
• The person's aendance status is incorrect.
Steps
1. Click Time & Aendance → Aendance Handling t
o enter aendance handling page.
2. Click Correct Check-in/out to enter adding check-in/out correcon page.
3. Select one or more persons from le list for correcon.
4. Select the correcon date.
DS-K1T341A Series Face Recognion Terminal User Manual
165