HIKVISION DS-K1T341A Series

4. Set the DNS parameters. You can enable Auto Obtain DNS, set the preferred DNS server and the
alternate DNS server.
7.2.2 Set RS-485 Parameters
The face
recognion terminal can connect external access controller, secure door control unit or
card reader via the RS-485 terminal.
Steps
1. Tap Comm. (Communicaon Sengs) on the Home page to enter the Communicaon Sengs
page.
2. On the Communicaon
Sengs page, tap RS-485 to enter the RS-485 tab.
Figure 7-5 Set RS-485 Parameters
3. Select an peripher
al type according to your actual needs.
DS-K1T341A Series Face Recognion Terminal User Manual
30