HIKVISION DS-K1T341A Series

Steps
1. Enter the System Conguraon module.
2. Click E
vent Picture Storage.
3. Set the Store Pictures in Server switch to on.
All the disks of the PC running the iVMS-4200 service will show.
4. Select the disk to save the pictures.
Note
The default saving path is: Disk/iVMS-4200alarmPicture
5. Click Sa
ve.
9.12.3 Set Alarm Sound
When the event is triggered, the client can give an audible warning to nofy the security
personnel. You can set the sound of the audible warning in this secon.
Steps
1. Open the System Conguraon page.
2. Click Alarm Sound tab to enter the Alarm Sound Sengs page.
3. Oponal: Click
and select the audio les from the local path for dierent events.
4. Oponal: Add cus
tomized alarm sound.
1) Click Add to add customized alarm sound.
2) Double click the Type eld to customize the alarm sound name as desired.
3)
Click and select the audio les from the local path for dierent alarms.
5. Oponal: Click for a tesng of the audio le.
6. Oponal: Click in the Operaon
column to delete the custom sound.
7. Click Save.
Note
The format of the audio le can only be WAV.
9.12.4 Set Access Control and Video Intercom Parameters
You can congure
the access control and video intercom parameters according to actual needs.
Steps
1. Open the System Conguraon page.
2. Click the Access Con
trol & Video Intercom tab.
3. Input the required informaon.
Ringtone
DS-K1T341A Series Face Recognion Terminal User Manual
173