HIKVISION DS-K1T341A Series User Manual

Note
Currently, the supported card enrollment staon model is DS-K1F180-D8E.
Card Type
Select the c
ard type as EM card or IC card according to the actual card type.
Buzzing
Enable or disable the buzzing when the card number is read successfully.
Card No. Type
Select the type of the card number according to actual needs.
M1 Card Encrypon
If the card is M1 card, and if you need to enable the M1 Card Encrypon funcon, you should
enable this funcon and select the sector of the card to encrypt.
Remote Mode: Issue Card by Card Reader
Select an access control device added in the client and swipe the card on its card reader to read
the card number.
9.5 Congure Schedule and Template
You can congure the template including holiday and week schedule. Aer seng the template,
you can adopt the congured template to access groups when seng the access groups, so that
the access group will take eect in the me
duraons of the template.
Note
For access group sengs, refer to Se
t Access Group to Assign Access Authorizaon to Persons .
9.5.1 Add Holiday
You can create holidays and set the days in the holidays, including start date, end date, and holiday
duraon
in one day.
Steps
Note
You can add up to 64 holidays in the soware system.
1. Click Access Con
trol → Schedule → Holiday to enter the Holiday page.
2. Click Add on the le panel.
3. Cr
eate a name for the holiday.
4. Oponal: Enter the descripons or some nocaons of this holiday in the Remark box.
5. Add a holiday period to the holiday list and congure the holiday duraon.
DS-K1T341A Series Face
Recognion Terminal User Manual
115

HIKVISION DS-K1T341A Series Specifications

General

Brand	HIKVISION
Model	DS-K1T341A Series
Category	Touch terminals
Language	English