HIKVISION DS-K1T341A Series

7.4.3 Export Data
Steps
1. Plug a USB ash drive in the device.
2. On the Home pag
e, tap Data → Export Data .
3. Tap Event Data, User Data, or Face Data.
4. Oponal: Create a password for exporng. When you import those data to another device, you
should enter the password.
Note
• The supported USB ash drive format is DB.
•
The system supports the USB ash drive with the storage of 1G to 32G. Make sure the free
space of the USB ash drive is more than 512M.
• The exported user data is a DB le, which cannot be edited.
7.5 Identy
Authencaon
Aer network conguraon, system parameters conguraon and user conguraon, you can go
back to the inial page for identy authencaon. The system will authencate person according
t
o the congured authencaon mode.
You can authencate identy via 1:1 matching or 1:N matching.
1:N Matching
Compare the captured face picture with all face pictures stored in the device.
1: 1 Matching
Compare the captured face picture with all face pictures stored in the device.
7.5.1 Authencate via Single Credenal
Set the user authencaon type before authencaon. For details, see Se
t Authencaon Mode .
Authencate face, card or QR code.
Face
Face forward at the camera and start authencaon via face.
Car
d
Present the card on the card presenng area and start authencaon via card.
Note
The card can be normal IC card, or encrypted card.
QR Code
DS-K1T341A Series Face Recognion Terminal User Manual
40