HIKVISION DS-K1T341A Series

7.9.3 Set Auto Aendance via Device
Set the aendance mode as auto, and you can set the aendance status and its available schedule.
The system will automacally change the
aendance status according to the congured schedule.
Before You Start
Add at least one user, and set the user's authencaon mode. For details, see User Managemen
t.
Steps
1. Tap T&A Status to enter the T&A Status page.
2. Set the Aendance Mode as Auto.
Figure 7-13 Auto Aendance Mode
3. Enable the Aendance Status funcon.
4. Enable a gr
oup of aendance status.
DS-K1T341A Series Face
Recognion Terminal User Manual
50