HIKVISION DS-K1T341A Series

Figure 7-12 Manual Aendance Mode
3. Enable the Aendance Status Required.
4. Enable a gr
oup of aendance status.
Note
The
Aendance Property will not be changed.
5. Oponal: Select an s
tatus and change its name if required.
The name will be displayed on the T & A Status page and the authencaon result page.
Result
You should select an aendance status manually aer
authencaon.
Note
If you do not select a status, the authencaon will be failed and it will not be marked as a valid
aendance.
DS-K1T341A Series Face Recognion Terminal User Manual
49