HIKVISION DS-K1T341A Series User Manual

Aendance status will be calculated as Check in/out according to the actual aendance
status on the device.
6. Click Set as Check Point.
The congured
aendance check point(s) are displayed on the right list.
7. Oponal: Aer seng aendance check points, and perform the following operaons.
Edit Check
P
oint
Check one aendance check point, click Edit to edit its informaon
including name, check point funcon, etc.
Check two or more aendance check points, click Edit to batch edit check
point funcon, enter remark, etc.
Delete Check
P
oint
Check one or more check points, and click Delete to delete it/them.
Congure Holiday
You can add the holiday during which the check-in or check-out will not be recorded.
Add Regular Holiday
You can congure a holiday which will take eect annually on regular days during the eecve
period, such as New Year's Day, Independence Day, Christmas Day, etc.
Steps
1. Enter the Time & Aendance module.
2. Click Aendance Sengs → Holida
y to enter the Holiday Sengs page.
3. Check Regular Holiday as holiday type.
4. Custom a name for the holiday.
5. Set the rst day of the holiday.
6. En
ter the number of the holiday days.
7. Set the aendance status if the employee works on holiday.
8. Oponal: Check Repeat Annually to make this holiday seng eecve every year.
9. Click OK.
The added holiday will display in the holiday list and calendar.
If the date is selected as dierent holidays, it will be recorded as the rst-added holiday.
10. Oponal:
Aer adding the holiday, perform one of the following operaons.
Edit Holiday Click to edit the holiday informaon.
Delete Holiday Select one or more added holidays, and click Dele
te to delete the
holiday(s) from the holiday list.
DS-K1T341A Series Face
Recognion Terminal User Manual
153

HIKVISION DS-K1T341A Series Specifications

General

Brand	HIKVISION
Model	DS-K1T341A Series
Category	Touch terminals
Language	English