HIKVISION DS-K1T341A Series

5. Click Add on the right to add a minor leave type.
6. Oponal: P
erform one of the following operaons for minor leave type.
Edit Move the cursor over the minor leave type and click
to edit the minor leave
type.
Delete Select one or mulple major leave types and click Dele
te on the right to delete the
selected minor leave type(s).
Synchronize Authencaon Record to Third-Party Database
The aendance data recorded on the client can be used by other system for calculaon or some
other operaons. You can enable synchronizaon funcon to apply the authencaon record from
the clien
t to the third-party database automacally.
Steps
1. Enter Time & Aendance module.
2. Click Aendance Sengs → Third-Party Database .
3. Set Apply to Database switch to on to enable synchronizaon funcon.
4. Select da
tabase Type as SQLServer or MySQL.
Note
If you select MySQL, y
ou should import the conguraon le (libmysql.dll) from local PC.
5. Se
t the other required parameters of the third-party database, including server IP address, port
No., database name, user name and password.
Note
The default port No. of the selected database type is displayed automacally. You can enter a
number r
anging from 1 to 65535 to customize the port No if needed.
6. Se
t table parameters of database according to the actual conguraon.
1) Enter the table name of the third-party database.
2) Set the mapped table elds between the client and the third-party database.
7. Click Save to test whether database can be connected and save the sengs for the successful
connecon.
• The
aendance data will be wrien to the third-party database.
• During synchronizaon, if the client disconnects with the third-party database, the client will
start reconnecon every 30 mins. Aer being reconnected, the client will synchronize the
data recorded during the disconnected me period to the third-party database.
DS-K1T341A Series Face
Recognion Terminal User Manual
155