HIKVISION DS-K1T341A Series

Figure 7-6 Wiegand Sengs
3. Enable the Wieg
and funcon.
4. Select a transmission direcon.
• Output: A face recognion terminal can connect an external access controller. And the two
devices will transmit the card No. via Wiegand 26 or Wiegand 34.
• Input: A face recognion terminal can connect a Wiegand card reader.
5. T
ap
to save the network parameters.
Note
If you change the external device, and aer you save the device parameters, the device will
reboot automacally.
DS-K1T341A Series Face Recognion Terminal User Manual
32