To Next Page

To Previous Page

Safety Instrucon

These instrucons are intended to ensure that user can use the product correctly to avoid danger

or property loss.

The precauon measure is divided into Dangers and Cauons:

Dangers: Neglecng any of the warnings may cause serious injury or death.

Cauons: Neglecng any of the cauons may cause injury or equipment damage.

Dangers: Follow these safeguards to prevent

serious injury or death.

Cauons: Follow these precauons to prevent

potenal injury or material damage.

Danger:

• All the electronic operaon should be strictly compliance with the electrical safety regulaons,

re prevenon regulaons and other related regulaons in your local region.

• Please use the power adapter, which is provided by normal company. The power consumpon

cannot be less than the required value.

• Do not connect several devices to one power adapter as adapter overload may cause over-heat

re hazard.

• Please make sure that the power has been disconnected before you wire, install or dismantle the

device.

• When the product is installed on wall or ceiling, the device shall be rmly xed.

• If smoke, odors or noise rise from the device, turn o the power at once and unplug the power

able, and then please contact the service center.

•

1. Risk of explosion if the baery is replaced by an incorrect type

2. Improper replacement of the baery with an incorrect type may defeat a safeguard (for

example, in the case of some lithium baery types).

This equipment is not suitable for use in locaons where children are likely to be present.

4. Do not dispose of the baery into re or a hot oven, or mechanically crush or cut the baery,

which may result in an explosion.

5. Do not leave the baery in an extremely high temperature surrounding environment, which

y result in an explosion or the leakage of ammable liquid or gas.

6. Do not subject the baery to extremely low air pressure, which may result in an explosion or

the leakage of ammable liquid or gas.

7. Dispose of used baeries according to the instrucons

• If the product does not work properly, please contact your dealer or the nearest service center.

ver aempt to disassemble the device yourself. (We shall not assume any responsibility for

problems caused by unauthorized repair or maintenance.)

DS-K1T341A Series Face Recognion Terminal User Manual

HIKVISION DS-K1T341A Series User Manual

Questions and Answers: