The air inlet is on the top and right side of the front panel. Air is pushed from the air inlet and
then goes through the chassis cage. The air is exhausted out the air outlet which is on the right
side of the back panel.
Air Flow through the Chassis is shown as below:
Each fan tray of SG-6000-X8180 has two fans. The fan trays are vertically located in the Fan0,
Fan1, Fan2 and Fan3 of the back panel. The fan trays can be replaced, see Replacing a Fan Tray of
SG-6000-X8180 for more information.
Chapter 1 Product Profile 57
To Next Page
Loading...
Need help?
General