ii
_____________________________________________________________________________________________
______________________________________________________________________________________________
NOTE
Shipping Check
When you receive the product, inspect it carefully to ensure that no damage
occurred during shipping. In particular, check the accessories, panel
switches, and connectors. If damage is evident, or if it fails to operate
according to the specifications, contact your dealer or Hioki representative.
Check the 3532-50 unit and the supplied accessories
Main unit
3532-50 LCR HiTESTER
Supplied accessories
(1) Instruction manual ... 1
(2) Grounded power cord ... 1
(3) Spare fuse for power supply (according to voltage specification) ... 1
100 V, 120 V setting: 250 V T1.0AL 20 mm x 5mmdia.
220 V, 240 V setting: 250 V T0.5AL 20 mm x 5mmdia.
No interface boards and no test cables are supplied with the unit as standard
equipment. You should order them separately, according to requirements.
To Next Page
Loading...
