Hioki 3532-50 - Panel Load Function

106
_____________________________________________________________________________________________
4.18 Panel Load Function
______________________________________________________________________________________________
4.18.1 Control Screen Sequence
Panel load screen
Initial screen
Menu screen
Application menu screen
Initial screen
4.18 Panel Load Function
Using the panel load function, saved test conditions can be loaded.
The test conditions which are saved:
Display parameters
Test range
Set value for averaging
Test frequency
Open and short circuit compensation values
Set value for test speed
Test signal level
Setting for trigger value
Beep sound setting
Voltage and current limit values
Set value for trigger delay
Comparator setting
Scaling setting
Display digits setting
Cable length setting
Display setting
Press the key.
Press the key.
Press the key.
Select the panel number which you wish to load.
When the loading has been completed, the system
returns automatically to the Initial screen.
The loading has been performed.
Testing starts with the new test conditions.