Hioki 3532-50 - Setting the Number of Displayed Digits; Control Screen Sequence

120
_____________________________________________________________________________________________
4.23 Setting the Number of Displayed Digits
______________________________________________________________________________________________
4.23.1 Control Screen Sequence
Initial screen screen
Initial screen
Menu screen
Application menu screen
Setting the number of
displayed digits on the
displayed-digit-number setup
screen
4.23 Setting the Number of Displayed Digits
The number of effective digits for measurement can be set on a parameter-
by-parameter basis.
Press the key.
Press the key.
Press the key.
Set the number of digits to be displayed.
When the setting is completed, press the key
to return to the Initial screen.