110
_____________________________________________________________________________________________
4.19 Setting the Beep Sound
______________________________________________________________________________________________
4.19.2 Details of the Setting Process
Application menu
screen
Initial screen
Menu screen
Beep sound setting for
when a key is pressed
Beep sound setting for
when the comparator
makes decisions
1. Press the key on the Initial screen to display the Menu screen.
2. Press the key on the Menu screen to display the Application menu
screen.
3. Press the key on the Application menu screen to display the Beep
sound setting screen.
Setting the beep sound produced each time a key is pressed:
: A beep sound for key input is emitted.
: No beep sound for key input is emitted.
Setting the beep sound produced when the comparator makes
decisions:
When the comparator makes a single decision:
: When the comparator result is IN, a beep sound is emitted.
:
When the comparator result is LO or HI, a beep sound is emitted.
: No beep sound is emitted when the comparator operates.
When the comparator makes two decisions:
: When both of these comparator results are IN, a beep sound is
emitted.
: When either of these comparator result is LO or HI, a beep sound is
emitted.
: No beep sound is emitted when the comparator operates.
3. When the setting has been established as above, press the key to return
to the Initial screen.
To Next Page
Loading...
Need help?
General
