Hioki 3532-50 - Chapter 1: Product Overview; Product Overview

1
_____________________________________________________________________________________________
1.1 Product Overview
______________________________________________________________________________________________
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
Chapter 1
Product Overview
1.1 Product Overview
The HIOKI 3532-50 LCR HiTESTER is an impedance meter which uses a
touch panel as the user interface. This interactive touch panel enables
extremely easy operation. The test frequency can be set from 42 Hz to 5
MHz at high resolution.
The values of a maximum of any four of the fourteen test parameters,
including not only impedance |Z| and phase angle θ, but also L, C, and R
etc., can be simultaneously displayed upon the screen.
Moreover, this widely applicable impedance meter can be set, not only to a
floating voltage setting, but also to a constant voltage setting or a constant
current setting.