Hioki 3532-50 - Details of the Setting Process

117
_____________________________________________________________________________________________
4.22 Continuous Test Function
______________________________________________________________________________________________
4.22.2 Details of the Setting Process
Saves conditions for
normal test.
Test conditions for some other test sample are already saved here
Saves conditions
f
or comparator
test.
Panel Save Screen
Initial screen
Menu screen
Application menu
screen
This section describes procedure when performing continuous testing with
panel numbers 6, 8, and 10 for example.
1. Save the continuous testing conditions on panel numbers 6, 8, and 10 using
the panel save function. The continuous testing is performed for the first and
third parameters which have been saved.
For details on panel save function, see Section 4.17.
2. Press the key on the Initial screen to display the Menu screen.
3. Press the key on the Menu screen to display the Application menu
screen.
4. Press the key on the Application menu screen to display the
Continuous test screen.