Hioki 3532-50 - Setting the Trigger Delay; Control Screen Sequence

74
_____________________________________________________________________________________________
4.11 Setting the Trigger Delay
______________________________________________________________________________________________
4.11.1 Control Screen Sequence
Initial screen
Initial screen
Menu screen
Trigger delay setting screen
4.11 Setting the Trigger Delay
The delay time period from input of the trigger signal to reading of the test
data can be set. The value of the trigger delay period can be set from 10 ms
to 9.99 s, with a resolution of 10 ms. With this function it is possible to
ensure that testing is started after the connection condition of the object
being tested and the test cables has stabilized.
Press the key.
Press the key.
Set the trigger delay time.
When the setting has been established, press the
key to return to the Initial screen.
The setting has been performed.