Hioki 3532-50 - Setting for Display; Control Screen Sequence

122
_____________________________________________________________________________________________
4.24 Setting for Display
______________________________________________________________________________________________
4.24.1 Control Screen Sequence
Initial screen screen
Initial screen
Menu screen
Application menu screen
Display Setting Screen
4.24 Setting for Display
In some applications, such as on a production line or where EXT I/O or
interfaces are used, it may not be necessary to display measurement values.
This unit allows ON/OFF settings of the display and voltage/current monitors
(Vmoni, Imoni) to be made.
Turning off the LCD display helps save power, as the LCD display and
backlight remain off. Moreover, the measurement time is reduced due to the
fact that measurement values and Vmoni and Imoni indications need not be
displayed. When the voltage and current monitors are turned off, the
measuring time is also reduced due to the fact that the Vmoni and Imoni
indications are not required.
Press the key.
Press the key.
Press the key.
Set ON or OFF of the display.
When the setting is completed, press the key
to return to the Initial screen.