Hioki 3532-50 - Setting Averaging

77
_____________________________________________________________________________________________
4.12 Setting Averaging
______________________________________________________________________________________________
4.12.1 Control Screen Sequence
Averaging setting screen
Initial screen
Initial screen
Menu screen
4.12 Setting Averaging
With the averaging function, the measured values can be averaged. Using
this function, it is possible to reduce fluctuations in the measured value
display.
The averaging can be performed over 2, 4, 8, 16, 32, or 64 times that
measurement is performed.
Press the key.
Press the key.
Set the number of measurement times for
averaging.
When the setting has been established, press the
key to return to the Initial screen.
The setting has been made.