Hioki 3532-50 - Details of the Setting Process

121
_____________________________________________________________________________________________
4.23 Setting the Number of Displayed Digits
______________________________________________________________________________________________
4.23.2 Details of the Setting Process
Initial screen
Application menu
screen
Menu screen
The number of displayed digits
Digits setting keys
The first parameter
The second parameter
The third parameter
The fourth parameter
Parameter
Setting value
θ,Q
Comparator Δ%
setting
D Others
5
Up to the
second decimal
place
Up to the fifth
decimal place
Up to 5 digits
4
Up to the first
decimal place
Up to the fourth
decimal place
Up to 4 digits
3
No decimal
place
Up to the third
decimal place
Up to 3 digits
1. Press the key on the Initial screen to display the Menu screen.
2. Press the key on the Menu screen to display the Application menu
screen.
3. Press the key on the Application menu screen to display the Setting the
displayed digits screen.
Press and for each parameter to set the number of displayed
digits. While the definable set values are 3, 4, and 5, the value is actually
selected according to the parameter type, as shown in the table below.
4. To exit from this mode, press the key to return the Initial screen.